User’s Manual
10
ZEKA LP
4.
ZEKA LP
MANAGMENT
The label printer management is carried through commands via serial or
USB interface. Four data transfer baud rates, determinable by switches or
interface command, are supported. The possible rates are 9600, 19200, 57600
and 115200 bps. The printer uses hardware data transfer protocol, which allows
direct control from DOS (PC connection), but Xon/Xoff protocol is also
supported.
The commands to
ZEKA LP
are composed by single text line ending with
LF (ОАh). They consists one or two letters followed by certain parameters
separated by commas. Commands separated by empty character (space) are
taken as syntax errors. The printer is case sensitive. Command starting with (
;
) character, as well as unknown or invalid command, won’t cause printer action.
Brief command description sorted alphabetically and by categories can be found
in chapters 5 and 6 and detailed description in chapter 7.
Using of application software (AS) is the quickest and most reliable way to
work with
ZEKA LP.
Through application software it is possible to configure
visually the look of any label before it’s been uploaded to the printer, as by this
way time and means are saved. It is not necessary to know the command
language in details to work with AS, because most configurations are done
visually by simplified tools.
It is possible to prepare the print information preliminary in text format
file and to send it through the serial interface.
Содержание LP
Страница 30: ...User s Manual 30 ZEKA LP 5 dots...
Страница 38: ...User s Manual 38 ZEKA LP format EI...