User’s Manual
49
ZEKA LP
7.9.16. ENABLE DATA RECEIVING
format:
GS ‘=’’1’’L’
(no LF at the end) GS = <1Dh>
Enables receiving of data.
7.9.17. BEEP
format:
07h
<BELL>
Emits beep tone.
7.9.18. DELETE GRAPHIC DATA
format:
18h
<CAN>
Deletes all collected graphic data from the graphic buffer.
7.9.19. SEND BYTE WITH VALUE <06H>
format:
06h
<ECHO>
The byte provokes sending of echo byte (06h).
7.9.20. INFORMATION ABOUT LABELS REMAINING
format:
PI
Sent data format:
m,n,a
Where:
m – Number of remaining label arrays
n – Number of remaining labels in the present array
a – Number of remaining for printing labels from the present array
The application software can use this command after the command Pm,n
to check whether the command was successful or failed (if paper ends for
example) In case
m
or
a
are different of zero this means that there is unfinished
print job, that can be resumed by the PC command.
Total number of remaining labels is
m*n+a
.
Содержание LP
Страница 30: ...User s Manual 30 ZEKA LP 5 dots...
Страница 38: ...User s Manual 38 ZEKA LP format EI...