User’s Manual
28
ZEKA LP
Number coded
words (data)
ECL
ECL code
words
1 – 31
1
4
32 – 63
2
8
64 – 127
3
16
128 – 255
4
32
256 – 928
5
64
p7 (c)
Data compression method.
c0
Automatically (default).
c1
Binary (Byte compaction).
p8 (f) Barcode positioning.
f0
Co-ordinates p1 and p2 are used.
f1
The barcode is centered in the rectangle set by p1, p2, p4 and p5.
(Default value)
p9 (x)
Maximal module (line) width in dots; allowed values x2 to x9,
default - x6.
p10 (y)
Maximal line height in dots; allowed values y4 to y99, default 4
times the width (4*p10).
p11 (r)
Maximal row number; allowed values r3 to r90, default - r90.
p12 (l)
Maximal column number; allowed values l5 to l34, default -
l34.
Data data to be printed. The format is same as text and barcode
(described below), but control characters can be added (ASCII codes smaller
than 32) by syntax ‘\dd’, where dd is decimal ASCII code of the character.
If the barcode with set line width and height can’t fit the rectangle defined
by p1, p2, p4 and p5, the printer automatically reduce p9, p10 and p6 until the
size is enough to be printed. The number of rows and columns is calculated
automatically, that the barcode ratio to be maximal close to p4 : p5 and width /
height of the line to be optimal for reading. If, in spite of the reduction, the
barcode does not fit in the rectangle, it won’t be printed.
Содержание LP
Страница 30: ...User s Manual 30 ZEKA LP 5 dots...
Страница 38: ...User s Manual 38 ZEKA LP format EI...