![background image](http://html1.mh-extra.com/html/zeka/lp/lp_programming-manual_3301653025.webp)
User’s Manual
25
ZEKA LP
7.3. GRAPHIC IMAGE FORMATION
7.3.1. GENERATE TEXT
This command is used to put text information in the image.
format:
Aa,b,c,d,e,f,g,h
a
Start co-ordinate along X in the upper left corner: 0..2047
b
Start co-ordinate along Y in the upper left corner: 0..2047
c
Text orientation: 0=0
о
, 1=90
о
, 2=180
о
, 3=270
о
. The rotation is done
clockwise.
d
Font choice. Following values are possible:
1
: 8x12 dots
2
: 10x16 dots
3
: 12x20 dots
4
: 14x24 dots
5
: 32x48 dots
d
can be also Latin letter. In that case it is user font name. The character
size of user fonts is held in the font. If J4 is in OFF position, around every
character automatically is added white frame with width of 1 dot, so the
printable size is 2 dots bigger than the pointed out above.
e
Choose multiplication factor along X for the font. Allowed values - 1..8. If
J4 is in OFF position the multiplication is done over the letter width. If J4
is in ON position the multiplication is done over the label width,
independently of the text orientation.
f
Choose multiplication factor along Y for the font. Allowed values - 1..9. If
J4 is in OFF position the multiplication is done over the letter height. If J4
is in ON position the multiplication is done over the label height,
independently of the text orientation.
g
Printing mode. N is normal, R – inverted, B – bold, W – inverted and bold.
h
Data for printing. The format is same for text and barcode formation and
is described bellow.
example
:
A100,10,3,2,3,3,N,”This is only a Test”
will make image of the text
“This is only a Test” from co-ordinate (100,10), rotated at 270
о
, with font 10x16
and multiplied by 3 in horizontal and vertical directions. The text is not
inverted.
Содержание LP
Страница 30: ...User s Manual 30 ZEKA LP 5 dots...
Страница 38: ...User s Manual 38 ZEKA LP format EI...