38
Operation
626140-9149-911
Operating manual TEMPAR console V9.0
Q-DAS network share:
To export TEMPAR data to a Q-DAS system, proceed as follows:
– Ensure that the Q-DAS PC can be reached from the TEMPAR system via
the network. If a firewall exists between the Q-DAS PC and the
TEMPAR system, it must be ensured that the necessary ports are open.
– Create a folder on the Q-DAS PC or select an existing folder. After the
folder has been enabled, this must be checked under Control
Panel/Administrative Tools/Computer Management/Shared
Folders/Shares (alternatively via Start/Run/ enter "compmgmt.msc"
and press OK).
– Enable access to this folder for all users (alternatively only for those
users that have access to the Q-DAS PC).
– Activate connection to network share.
– Enter the Windows user who has access to the Q-DAS PC / enabled
folder.
– Enter the password of the Windows user.
– Enter the IP address of the PC on which the enabled folder was
created (e.g. 192.168.0.1).
– The files with the measured values are created in the enabled folder
according to the "Interval measuring data (ms)” (See chapter "3.2
Operation as “Standard” user group") in the enabled folder. Naming
takes place according to the following template:
“Q-DAS_<Seriennummer
Konsole/Messzone>_YYYYMMDD-hhmmss.DFQ”.
