Zeiss METROTOM 1500 G3, Руководство по эксплуатации, Страница: 80 / 120

Setting up the workpiece and measurement
7-8
61211-8140502 METROTOM 1500 G3 1.4
Fasten the workpiece by means of double-sided
adhesive tape.
Holding block and fixing aids
1 Slim long workpiece
2 Wedge made of polystyrene for clamping the workpiece
3 Compact workpiece
4 Holding block made of polystyrene with or without internal recess; cylindrical or
rectangular
5 Clamping the workpiece by means of double-sided adhesive tape
NOTE
In the ideal case, the outer workpiece surfaces to be measured should
not rest against the holding block. The adjacent polystyrene can falsify
the measured value, e.g. if compressed polystyrene appears to indicate
wrong surface points. However, the workpiece must be in a stable posi-
tion. Consequently, you must check whether the workpiece surfaces to
be measured should be uncovered.
Projection
Make sure that the workpiece is always shown as large as possible on
the detector. This ensures the smallest possible voxel size for subsequent
evaluation.
NOTE
The projection surface may be enlarged by rotating the workpiece. This
must be taken into account.