28 – LSM 880 Training Guide
Shutting Down the System
1.
From the ‘Lasers’ dialog, select each laser that has been powered on and turn them off.
Note: For the Argon laser, please wait 5 minutes before powering off the system electronics.
2.
Close ZEN 2.3 application.
Note: When prompted turn off the lasers – change the state of each laser to OFF.
3.
Shut down Windows operating system.
Note: Please wait for operating system to shut down completely before proceeding to next steps.
4.
Turn off HXP-120V epifluorescence lamp (see Power On Routine Step 3).
5.
Turn off ‘Systems PC’ and ‘Components’ power switches (see Power On Routine Step 2).
6.
Turn off ‘Main Switch’ (see Power On Routine Step 1).
