Zeiss i.Profiler plus Скачать руководство пользователя страница 38

Страница: 38 / 66

EN 20_070_0009I v1.5

Installation

Daily commissioning

WARNING - GENERAL HAZARD

Before using the device, the user must ensure that it is functioning
correctly and is in proper condition, and the user must observe the

Instructions for use - Operating.
The following inspection measures must be completed before use

each workday:

•

Visual inspection of the housing, exterior labeling, Instructions for

use - Operating, accessories and power cable for damage. All of

these elements must be present. If parts are missing or there is

visible damage, the device may not be used and must be shut

down.

•

The ventilation slots on the housing may not be covered or

blocked!

•

Functional testing of measurement function using the test eye de-

vice.

WARNING - DANGER OF ELECTRICAL SHOCK

Please ensure that the following requirements are fulfilled before each

commissioning, and that they continue to be fulfilled during ongoing

operations:

•

The device is connected with the power cable intended for the device.

If an instrument table is used, the device receives electrical power

through the table.

If a table which has not been authorized by Carl Zeiss is used, the user

bears sole responsibility for the electrical safety of the device.

•

The power plug must be inserted into an outlet with a proper

protective conductor connection.

•

All cables and plugs may only be used if they are free from defects.

Содержание i.Profiler plus



































































Результаты поиска

Содержание i.Profiler plus

Отзывы:

Похожие инструкции для i.Profiler plus

Бренды по названию

Популярные бренды

Zeiss i.Profiler plus, Инструкция по эксплуатации

Результаты поиска

Содержание i.Profiler plus

Отзывы:

Похожие инструкции для i.Profiler plus

Бренды по названию

Популярные бренды