Zeiss i.Profiler plus Скачать руководство пользователя страница 53

Страница: 53 / 66

EN 20_070_0009I v1.5

Maintenance

•

To clean, all device housing components can be wiped off with a cloth

that is free from drips. Wipe away any residue with distilled water mixed

with a spray of common cleaning agent.

•

Please use commonly available computer and monitor cleaning cloths to

clean the display and keyboard.

•

A fine brush can be used to remove dust on optical surfaces.

•

When not in use the device should be covered with the included

protective cover to protect against dust.

CAUTION - PROPERTY DAMAGE

National disinfecting regulations must be observed when selecting suitable

disinfecting agents. Please note that some cleaning and disinfecting agents

may cause negative changes in plastic components.

Damage caused by such disinfecting measures are not covered by our

warranty conditions. The surfaces of the product have been tested to

withstand frequent treatment with disinfecting and cleaning agents

containing alcohol over the long term.
Please note that some cleaning and disinfecting agents may cause negative

changes in plastic components. Damage caused by such dis- infecting

agents is not covered by our warranty conditions.
Do not use any aggressive or abrasive cleaning agents. Never clean the

measurement optic aperture (

, Fig. 7, page 21).

The aperture of the measurement optic is checked for contamination

during regular safety technology controls. Cleaning may only be carried out

by an agent of Carl Zeiss Vision!

Содержание i.Profiler plus



































































Результаты поиска

Содержание i.Profiler plus

Отзывы:

Похожие инструкции для i.Profiler plus

Бренды по названию

Популярные бренды

Zeiss i.Profiler plus, Инструкция по эксплуатации

Результаты поиска

Содержание i.Profiler plus

Отзывы:

Похожие инструкции для i.Profiler plus

Бренды по названию

Популярные бренды