Zeiss Humphrey Field Analyzer 3, Инструкция по эксплуатации

Страница: 45 / 156

Settings Option Description
User Management General: Settings for user login.

Users: List of users.
Automatically login as Set the default role to login as Doctor or Operator or choose
Deactivated.

Note: Login screen will be disabled when choosing to activate a
Single-User Mode.
Login user group for
FORUM users If the device is in FORUM connected mode, allows you to use your
FORUM login as your HFA3 login.
Auto logoff time Sets the amount of system idle time, in minutes, before the user is
automatically logged off.
Password strength Sets the requirements for passwords:
• Simple - no requirements.
• Complex - password must have at least six characters and be
either a mix of upper and lower case letters or a mix of letters
and numbers.
Users Lists current users and the administrator and emergency user.
Add User: Click on Add User to open a form to add an user. Complete
the form, choose a role (Administrator, Doctor, Operator) and click on
Add User to add.
Delete User: Select the user you want to delete and click on Delete
User.
Change Password...: To change a password, highlight the user, and
click on Change Password... Next screen asks you to fill in a new
password, to repeat the new password and click on Reset password.
HFA3 Instructions for Use 2660021166131 Rev. A 2018-11
Go to Contents
Getting Started 3-23
Licenses
Use the License Settings screen to manage device licenses. License activation, return, and repair can
be done online or offline.
Note: You must perform a backup after license activation or license support actions if Data backup
on shutdown is not activated.
Note: Settings with a circled arrow icon require a restart to become active.
Manage Licenses Online
To manage licenses online, enter the Activation ID for the license in the Activation IDs field for the
desired action, then click the appropriate button (Activate, Return, or Repair). Contact ZEISS service
to obtain an activation ID for a new license.
Manage Licenses Offline
1. If the device does not have a network connection, connect a USB drive to the device.
2. Enter the Activation ID and select Create... to create a requirement file.
3. Submit the requirement file to ZEISS Service. You will receive an activation file.
4. Select Import... to import the activation file