Zeiss Humphrey Field Analyzer 3, Инструкция по эксплуатации

Страница: 102 / 156

Networking
Go to Contents
HFA3 Instructions for Use 2660021166131 Rev. A 2018-11
7-8
Connect to a Printer
This chapter contains instructions for:
• “Wireless Printers,” on page 7-8
• “Wired Printers,” on page 7-10
• “Shared Network Printers,” on page 7-10
Wireless Printers
Connect the HFA3 to a wireless printer using a wireless adapter:
1. Ensure that both the HFA3 and printer are plugged in and turned on.
2. Open the side panel of the instrument to access the USB ports (see
“The HFA3– Side Panel
Opened,” on page 3-3 ).
3. Plug the USB wireless adapter into an HFA3 USB port.
4. Refer to the manufacturer’s printer instructions to configure the printer. For the HP Officejet
Pro 251dw Wireless Color Printer use the following instructions:
A. On the printer screen select Setup > Network > Wireless. Set Wireless to On.
B. Use the Back button
to return to the previous screen.
C. Select Wireless Direct to access the Wireless Direct Settings. Select On.
D. Set Security to On.
E. Select Security Passcode and record the printer passcode visible on the screen. Select OK.
F. Select Wireless Direct Name and record the printer name. Select OK.
G. Return to the Setup Menu using the Back button. Select Print Reports.
H. Select Network Configuration Page to print the page and obtain the printer IPv4 IP
address.
5. Access the Windows desktop on the HFA3:
A. In the Patient screen select Change user from the Close button menu
.
Log in as
Service using 0000 as the password.
B. Select Settings >Service.
C. In the Service screen select Start service mode and log off.
D. Select the IT Administrator login and enter Admin@123 as the password. The Windows
desktop appears.
6. Click on the network icon located on the Task Bar in the Windows desktop.
7. Select the network connection for the wireless printer recorded in step 4.
8. Ensure that Connect automatically is checked and select Connect.