10
Corona process | User Manual
Safety
Corona process
2.3 Safety instructions
Warning
ELECTRICAL ENERGY HAZARD
The device may be operated only at the operating voltage specified in
Section 8 “Technical data”.
Before performing maintenance and repair work or replacing
components, the respective device must be disconnected from all
power sources. Please also ensure that it cannot be accidentally
switched on again.
The Corona process must not be operated in damaged or damp
condition.
RISK OF EXPLOSION
The device must not be opened in a potentially explosive atmosphere.
It is prohibited to mount the plugs with a higher torque than 15 Nm in
order to guarantee the tightness and the explosion protection of the
spectrometer.
Please also note that the power supply unit must not be used in a
potentially explosive atmosphere. Unplug the power connector of the
device only when the device is deenergized.
Caution
GENERAL RISK
The Corona process, including its original accessories, must be used for
the purposes described in the present User Manual. The manufacturer
cannot be held liable for any other use.
Warning signs and safety instructions must not be removed and must
always be clearly legible.
The devices may be operated only by properly trained personnel. This
personnel must be instructed concerning the possible risks when the
device is in operation and in the appropriate applications.
The device is sealed very tightly; therefore, do not open it.
Modifications or repairs of the device and any other devices operated
together with the Corona process may be performed only by Service
employees or authorized personnel. The manufacturer shall not be
liable for damage caused by inadmissible actions performed on the
device. In addition, such inadmissible interventions shall render all
warranty claims null and void.
