20
Corona process | User Manual
Device description
Corona process
3.4 Software
3.4.1 ZEISS InProcess
The ZEISS
InProcess
software included in the scope of supply is required to
control the
Corona process
measuring system and process the generated
measurement data.
Note
For details on installation, setup and use of the software, see Section
4.4 or refer to the "InProcess Manual" included in the scope of supply.
The software manual is available on the attached CD.
The
Corona process
measuring system is approved for use with the following
software packages:
• InProcess
• Aspect Plus
The
OSIS SDK
Software Development Kit
(000000-2101-333) is available for
developing your own software.
3.4.2 IP addresses
Corona process
measuring systems are delivered with predefined IP addresses.
The following standard IP addresses are to be used:
• Corona process: 192.168.0.177
If several
Corona process
measuring systems are operated in a device group with
a single PC, each system must have its own IP address. In this case, the IP address
must be changed.
