Installation
fåëí~ääáåÖ=íÜÉ=Å~ãÉê~=ÇêáîÉê=ïáíÜ=íÜÉ=Ü~êÇï~êÉ=
ïáò~êÇ=
Notes:
•
For installation on a computer running under the operating system
Microsoft Windows XP Professional and Microsoft Windows Vista, you
need administrator rights. Enter the system using a user name with
administrator rights, or consult your system administrator.
•
The installation procedure is displayed in this Installation Guide with
screenshots of Microsoft Windows XP Professional.
If you have fitted a PCI bus or a PCcard (CardBus) interface card
into your computer, you first need to install these with the help of
the documentation enclosed by the manufacturer. Depending on
your operating system, this installation may not be necessary, as
the drivers may already be integrated into the operating system.
In addition to installing the AxioCam MR driver, to carry out full
installation of the camera you also need to check and, if necessary,
update the camera’s firmware. These tasks are performed by the
AxioCam MR installation program. This program must also be
called up after installation of the camera driver using the hardware
wizard (see the section "Installing the camera driver using the
setup program").
This section describes installation using the hardware wizard. If you want to
update the camera installation or if you have interrupted the driver wizard,
follow the instructions in chapter "Installing the camera driver with the setup
program".
Once you have connected the AxioCam MR, the
Found New Hardware
Wizard
dialog appears on your screen. Please ensure that during all the steps
below, the DVD-ROM containing the AxioCam MR driver is in your PC’s DVD
drive.
20
M 60-3-0014 e / printed 12.2008
