Image Acquisition
The image rate can be further increased by deactivating certain AxioVision
features:
•
Deactivating the focus bar.
•
Deactivating the live image scaling (1:1 representation of the image).
•
Activating a frame for the live image (
Size
) on the
Frame
property page.
•
Set image orientation to original on the
General
property page (no
rotation).
Notes:
•
Note that the above mentioned notes are only valid for short exposure
times, as for very long exposure times the speed of the acquisition is
mainly dominated by the exposure time.
•
For very long exposure times, the live image will appear grainy, as
automatic amplification is active. However, this will not influence the
quality of the final image.
kçíÉë=çå=çéíáãìã=Åçäçê=êÉéêçÇìÅíáçå=áå=
^ñáçsáëáçå=
Below you will find a detailed description of how best to set up AxioVision to
achieve optimum color reproduction with the AxioCam MR.
Note:
•
For an optimum color reproduction the monitor first has to be adjusted.
To do so please use a well-suited image.
Adjusting the display characteristic curve in AxioVision
In order to achieve optimum reproduction of color images of the AxioCam
MRc data on a monitor, the display characteristic curve must be used to set
"gamma compensation". The advantage here is that only the display is
influenced and the actual data remain unchanged. Further details on this can
be found below. The settings can be done as follows:
AxioCam MR Instal Reference
69
