Image Acquisition
¾
Threshold Mode
This value allows a smooth transition between sharpened image areas and
image areas excluded by
Level Low
/
Level High
. It is only effective when
threshold values are set.
This parameter can be switched between
Binary
=1 (Detault) or
Linear
=0.
¾
Clip To Valid Bits
This parameter limits the bit range of the image to the original bit range
following the increase in sharpness.
This parameter can be switched between On=1 (Detault) or Off=0.
¾
The parameters set for the sharpening function are saved as a tag
in the AxioVision image format. The image tags documented in the
image properties and can be inserted as annotations in the image.
The 9 parameters of the implemented method
Unsharp Masking are
indicated
:
The meaning of the 9 values, which are separated by a comma, are
described above.
pÜìííÉê=Åçåíêçä=
Via a supplementary cable the AxioCam MR offers a TTL control pulse, which
can be used, for example, to control a mechanical shutter (e.g. "Uniblitz") in
synchronism with the camera’s exposure time.
As soon as this output is activated you can select the polarity that you want to
set for this signal:
¾
Enable for Snap
If this check box is activated, the shutter pulse is only generated during image
acquisition.
64
M 60-3-0014 e / printed 12.2008
