Installation
Switch off your PC and all connected peripherals. Disconnect the PC and the
peripherals from the mains. The FireWire PCI bus interface card can now be
fitted into the appropriate slot on your computer.
Special details on opening your computer and on the slots it
contains can be found in the relevant documentation from your
PC’s manufacturer.
`çååÉÅíáåÖ=íÜÉ=Å~ãÉê~=íç=íÜÉ=m`=
Lay the data cable carefully between the camera and the PC. Make
sure that the cable is a safe distance from hot light sources on the
microscope, to prevent it being damaged by heat.
To connect the camera to a PC, you require a FireWire cable with a 6-pin
connector at both ends. This is supplied with the camera.
Connect the FireWire cable of the AxioCam MR to the PCI bus interface card.
Connecting the AxioCam MR to the FireWire PCI bus interface card
10
M 60-3-0014 e / printed 12.2008
