Zebex Z-3051BT, Руководство пользователя, Страница: 14 / 72

Handheld Bluetooth® CCD/Laser Scanner 6
U
SER
’
S
M
ANUAL
Once the scanner is well situated in the cradle, press down any one of the small buttons
at the side of cradle
LED lamp to start charging (Shown as Figure).
Figure 2-7 Press any one to start charging
The LED of scanner light in RED as in charge, and light in BLUE when full charged. Refer to
Chapter 9 for LED indication.
We call this “Smart Charge”, as battery life is well depended on the charging number of
times, so only charge the batteries when necessary by following the abovementioned
procedures to prolong your battery life.
You may also set up auto-charging as every time the scanner is placed into the cradle.
Follow and scan the appropriate barcode symbols to set up from programming section of
this booklet
Note:

For first charging, always charge the batteries over 5 hours continuously to
prolong your battery life.

After every full charge, you may use the scanner for 8 hours continuously.

Recommend ed charging environment is temperature in 0
°
C~35
°
C (32
°
F~95
°
F).
Connecting the Cradle
There are two types of cradle to select for this scanner.

Charging Cradle

Cradle Host
Charging Cradle
This cradle designs for battery charging only, it does not support radio communication.
Simply connect the external DC-9V9W power adapter into it and place scanner into
cradle to start charging.
When charging is not required, it is recommended to remove the adapter plug to retain
the battery life.
Cradle Host
The cradle host features with advanced wireless technology and designs to support radio
communication to the scanner. It the same has charging functionality. Refer to
Charging Batteries section for battery charging instructions.