background image

 

Handheld Bluetooth® CCD/Laser Scanner 

iv 

Laser Light Viewing

: The scan window is the only aperture through which laser light may 

be observed from this product. A failure of the scanner engine, while the laser diode 
continues to emit a laser beam, may cause emission levels to exceed those for safe 
operation. The scanner has safeguards to prevent this occurrence. If, however, a 
stationary laser beam is emitted, the failing scanner should be disconnected from its 
power source immediately. 

 

Adjustments

: Do not attempt any adjustments or alteration of this product. Do not 

remove the protective housing of the scanner. There are no user-serviceable parts inside. 

 

Optical

: The use of optical instruments with this product will increase the eye hazard.   

Optical instruments include binoculars, magnifying glasses, and microscopes but do not 
include normal eye glasses worn by the user. 

 

CAUTION

: Use of controls or adjustments or performance of procedures other than those 

specified herein may result in hazardous radiation exposure. 

 
 
 

For CE-Countries 

 

This scanner is in conformity with CE standards. Please note that an approved, CE-marked 
power supply unit should be used in order to maintain CE conformance. 

Содержание Z-3051BT









































































Отзывы: