Zebex Z-3051BT, Руководство пользователя, Страница: 21 / 72

Handheld Bluetooth® CCD/Laser Scanner 13
U
SER
’
S
M
ANUAL
8. Right click on the icon and select “Connect Bluetooth Serial Port”. Once pairing is
completed, the scanner will make low-high beep tone and the LED light in GREEN.
Note:
When scanner is set in slave mode, and the master device supports Piconet, this master
device can connect with up to 7 slave mode scanners or equipments at the same time.
Figure 3-5
9. Right click on icon and select “Contents” and remember your SPP Bluetooth® COM
port.
Figure 3-6
The following steps will help you verify the communication status; the actual application
depends on your application software used.