Handheld Bluetooth® CCD/Laser Scanner
16
U
SER
’
S
M
ANUAL
6.
Scan “Confirm the Setting” barcode label confirm the Bluetooth® address.
Hint:
It is often found too much trouble to scan ASCII barcode label,
especially there are 12 digits to be entered. You can create a Code
39 barcode label of these 12 digits, and scan this code only for your
Bluetooth® address entry and jump to scan “Confirm the Setting”.
The Code 39 barcode label formula as follow:
BxxxxxxxxxxxxT; where “x” represents as these 12 digits.
7.
Scan “Set PIN Code” barcode label if required, otherwise jump to “Begin Pair with
Slave”.
Note:
The PIN code is an 8
digit PIN code given by remote device, you may also enter
“12345678” or ignore this entry and go directly to scan “Begin Pair with Slave” barcode
label.
8.
Scan “Confirm the Setting” barcode label to confirm the PIN code setting.
9.
Scan “Begin Pair with Slave” barcode label and a beep tone is heard to confirm
setting than start pairing.
At the same time, the scanner LED flashes in GREEN light, and if pairing successfully,
then scanner will emit Low-High beep tone, GREEN light of scanner LED is on.
If pairing failed, the scanner emits a series beep tone and you can start set-up
procedures all over again.
10.
Scan “End of Configuration” to exit set up.
Содержание Z-3051BT
Страница 1: ...Advanced Handheld High Speed Laser Scanner 1...
Страница 2: ......
Страница 8: ......
Страница 11: ...Handheld Bluetooth CCD Laser Scanner 3 USER S MANUAL Scanner Outline Cradle Outline...