Solo documento principale.
31/67
Identification: MD-AL-GI-00
Rev. 1.2 07.06.21 - Application: GID
Connext User Manual
Rev. 2.2 10/01/2023
1)
Remove a suitable length of the protective sleeve, as shown in the figure (A: 80~100 mm B:
6~8 mm).
Figure 27
–
Preparing RS485 cables
2)
Connect the 2-
pole cable to the port of the photovoltaic inverter marked “RS485”. Follow the
polarity shown in the figure and the pin-out in the table. For -V1 and -V2 models, refer to the
connection on the left, for -V3 models, refer to the COM connection on the right.
Figure 28 - Connections on photovoltaic inverter (-V1 and -V2 on the left; -V3 on the right)
RS485 Pin
24-pin terminal block
RS485 + (Red)/ 1
9
RS485
–
(Black)/ 3
10
Table 11- RS485 connections to photovoltaic inverter
SD
485s
