ZCS AZZURRO CONNEXT Скачать руководство пользователя страница 5

Страница: 5 / 67

Solo documento principale.

5/67

Identification: MD-AL-GI-00
Rev. 1.2 07.06.21 - Application: GID

Connext User Manual
Rev. 2.2 10/01/2023

Preface

General information

Please read this manual carefully before installation, use or maintenance.

This manual contains

important safety instructions that must be followed during installation and maintenance of the

system.

Scope

This manual describes the assembly, installation, electrical connections, commissioning,

maintenance and troubleshooting of the Connext system.

Keep this manual so that it is accessible at

all times.

Recipients

This manual is intended for qualified technical personnel (installers, technicians, electricians,

technical support personnel or anyone who is qualified and certified to work on an electrical system),

responsible for installation and start-up of the system. The manual is also intended for end users

who can find useful information on how to manage their installation via the Connext system.

Symbols used

This manual provides information for safe operation and uses certain symbols to ensure the safety
of personnel and materials, and for efficient use of the equipment during normal operation.

It is important to understand this information to prevent accidents and damage to property. Please

take note of the following symbols used in this manual.

Danger: indicates a hazardous situation which, if not resolved or

avoided, could result in serious personal injury or death

Danger

Warning: indicates a hazardous situation which, if not resolved or

avoided, could result in serious personal injury or death

Warning

Содержание AZZURRO CONNEXT




































































Результаты поиска

Содержание AZZURRO CONNEXT

Отзывы:

Похожие инструкции для AZZURRO CONNEXT

Бренды по названию

Популярные бренды

ZCS AZZURRO CONNEXT, Руководство пользователя

Результаты поиска

Содержание AZZURRO CONNEXT

Отзывы:

Похожие инструкции для AZZURRO CONNEXT

Бренды по названию

Популярные бренды