Solo documento principale.
7/67
Identification: MD-AL-GI-00
Rev. 1.2 07.06.21 - Application: GID
Connext User Manual
Rev. 2.2 10/01/2023
1.
Preliminary safety instructions
If you have problems or questions in reading and understanding the
following information, please contact Zucchetti Centro Sistemi S.p.A.
through the appropriate channels.
Note
1.1.
Safety instructions
This section highlights the main safety instructions to be followed during installation and use of the
equipment.
Before installing and using the equipment, make sure you read and understand the instructions in
this manual and familiarise yourself with the relative safety symbols shown in this chapter.
According to national and local requirements, permission must be obtained from your local provider
before connecting to the electrical grid. All connections must be carried out by a qualified electrician.
All installation operations must be carried out by a qualified and competent electrician.
Contact the nearest authorised service centre for any repairs or maintenance. Contact your
distributor for information on the nearest authorised service centre. DO NOT carry out repairs
yourself, as this may result in injury or damage.
Qualified personnel
Ensure that the operator has the necessary skills and training to operate the equipment. Personnel
responsible for use and maintenance of the equipment must be qualified and capable of performing
the activities described, and must also have adequate knowledge on how to correctly interpret the
contents of this manual. For safety reasons, this system must only be installed by a qualified
electrician with the necessary training and/or skills and knowledge. Zucchetti Centro Sistemi S.p.A.
declines all responsibility for damage to property or personal injury caused by incorrect use of the
device.
Do not attempt in any way to repair or replace components of the system without the assistance of
qualified personnel.
Installation requirements
Install and start the system according to the following instructions. Choose a suitable location for
installation of the electrical equipment. Make sure there is sufficient space to accommodate future
maintenance work.
