Solo documento principale.
53/67
Identification: MD-AL-GI-00
Rev. 1.2 07.06.21 - Application: GID
Connext User Manual
Rev. 2.2 10/01/2023
8.
Dry contact management
The Connext device can also be used to manage external loads such as heat pumps, hot water
boilers, etc.
There are 4 outputs in total, please refer to the table below for physical connections.
Output on app
24-pin terminal block
Output 1
3 - 4
Output 2
2 - 4
Output 3
16
–
17
–
18
Output 4
13
–
14 - 15
Table20 - Output settings on app
8.1.
Setting dry contacts from app
ONLY THE OWNER AND ADMINISTRATORS CAN ADD, REMOVE AND CHANGE SETTINGS FOR DRY
CONTACTS
Figure 61 - Setting dry contacts (1)
Each output can be set using several variables as a control. These are: battery status (SoC %),
photovoltaic power produced (W), vehicle charging power (W), power fed into or withdrawn from
the grid (W), in-feed power (W).
