ZCS Azzurro 3000SP, Быстрое руководство по установке

Страница: 5 / 26

The 3000SP will remain in Standby until:
•
the difference between the photovoltaic
production and the power required by the load is
less than 100W
•
the battery is fully charged and the photovoltaic
production is higher than the consumption (with
tolerance of 100W)
•
the battery is flat and the photovoltaic production
is lower than the consumption (with tolerance of
100W)
When the power produced from the photovoltaic
system is greater than the energy required by the
loads, the 3000SP system will charge the battery with
the excess energy.
When the battery is fully charged, or when the
charging power is limited (to preserve the integrity of
the battery), the excess energy will be exported to
the grid.
Charge
When the power of the photovoltaic system is once
again less than the power required by the loads, the
system will use the energy stored in the battery to
power the domestic utilities.
Discharge
When the sum of the power produced by the
photovoltaic system and supplied by the battery is
less than that required by the loads, the missing
energy will be taken from the grid.
Standby
Standby
Press the “↓” key once from the
main menu to access the
instantaneous information on how
to operate the 3000SP.
Press the “↓” key a second time to
display the power flows on the CTs.
CTA 0.30kW IMPORT
CTB 0.00kW IMPORT
CTC 0.00kW IMPORT
CTPV 1.04kW EXPORT
PF 99%
PF 0%
PF 0%
PF 99%
6. OPERATING STATES IN AUTOMATIC MODE
5. QUICK INFO ON SYSTEM STATUS
Charge
Charge
Discharge
Discharge