ZCS Azzurro 3000SP, Быстрое руководство по установке

Страница: 21 / 26


Country code indicating the current legislation

Firmware version installed

Information on EPS mode and start-up time

Communication address (enter a value of “01” for monitoring with Wi-Fi)

Information on operating mode (“Automatic Mode” for standard operation)

Serial number of the machine

Software version installed

Hardware version

Response delay in frequency

Information on DRMs0 mode (to be enabled only for Australia)

Response delay in voltage

Power factor value

Multiplying coefficient of the PV power value read by the CTpv sensor

CT direction status

Connected battery model and
firmware version

Total battery capacity in Ah
*

Battery Depth of Discharge (DoD
and DoD
EPS
)

Maximum charge current in A

Max voltage value (protection)

Max voltage value (charge)

Maximum discharge current in A

Min voltage value (discharge)
*Note : if there is more than
one battery, the sum of the
total capacities will be shown
on the display
80
% 80 %
16. CHECKING THE SET PARAMETERS
To check whether the parameters set are correct, enter “System Info” on the display menu and check the data,
especially those highlighted.