Main Menu Advanced Setup
21
Advanced Setup
Prevent Empty Pan
Prevent empty pan removes the blank (no assign) leaving only the L, C, R option while cycling through the
panning in the ENG pan matrix or when using AutoPan
Display Speed
The display speed should normally be set to fast. When set to fast the display is updated every frame.
Though when using a lot of effects, cross points and/or are recording at a high sample rate and the user
interface is getting hard to use, change the display speed to slow which will slow down the refresh rate.
Please note the display speed will automatically go into slow when mirroring or when the unit needs more
horsepower for recording.
Update Bootloader
The bootloader is part of the software that boot up Nova. Generally the boot loader will not need to be
updated. If the boot loader needs to be updated there will be a note released with the software to do so.
The boot loader software is already contained within Nova’s software.
Update IFB Module
The IFB module is updated from this menu. Generally the IFB module will not need to be updated, if it does
need to be updated there will be a note released with the software to do so. The IFB module software is
already contained within Nova’s software.
Debug Bits
Debug bits a factory diagnostic menu and should stay set to 0
.
Allow Logging
Allow logging will turn on an internal logging feature which will allow Nova to keep a log of warning and
error messages which then can be used by the factory to diagnose the unit. The logged messages are
displayed on the log screen. Please note if logging is not turned on then Nova will not log the errors.
Log Screen
The log screen is where Nova displays the logged errors and warnings.
Upgrade Code
This would be used to enter any future upgrade codes
Slate Always On
•
NORMAL
- This is the typical setting that would be used. With this setting pressing and holding the slate
key will activate the slate microphone.
•
FORCED
- When the slate microphone is activated the forced setting locks the slate microphone in the
on position. To deactivate the slate microphone power cycle Nova.
EXT Meter Decay
This adjusts the decay of the Oasis / Touch meters in milliseconds.
EXT Meter Hold
This adjusts the hold time of the Oasis / Touch meters in milliseconds.
