Main Menu Headphone Setup
16
Headphone Setup
Nova has 12 individual headphone setup matrices available. Each matrix can
contain any combination of the following:
•
12 Card tracks (TRK)
•
4 Output Buses (OUT)
•
2 Analog return inputs (RET)
Setting up headphone presets
1.
Scroll the MENU knob to highlight the desired cross-point.
L selections are sent to the left ear and R selections are sent to the right ear.
2.
Press the MENU knob to put an X in the cross point.
3.
When a cross point is selected a green check will appear in the enable the tab.
When a preset is enabled that setup will be available when cycling through the headphone presets.
If the preset is not enabled that preset will be skipped over when cycling through the presets.
Pressing the F10 key will toggle between enable / disable.
4.
Pressing the F8 key will advance to the next setup, pressing the F7 key will navigate back one preset.
5.
To exit the setup menu, press the BACK key.
Naming the headphone setup
1.
From the headphone setup matrix press the F11 key to open the monitor memory name.
2.
Scroll to highlight the desired position and press the MENU knob to open the onscreen keyboard.
3.
Enter the name and press OK when done.
Inverting the phase of a selection
1.
When in the headphone set up matrix press the STAR key, an on screen pop-“ALLOW INVERT” will appear.
2.
Then when selecting a cross point in the matrix press the MENU knob a second time to invert the phase.
3.
When the phase is inverted the cross point the X will appear with a line over.
Headphone matrix setup to decode MS stereo
The following is the proper setting for M-S headphone decoding. This example
uses card track 1 as the mid and card track 2 as the side.
