Page - 22/54
AFDZP0BA – VCM Zapi 2uC - User Manual
A19
DI5
Input of the switch DI5. The input is active high. Read
by both microcontrollers.
A20
DI6
Input of the switch DI6. The input is active high.
A21
DI7
Input of the switch DI7. The input is active high.
A22
NPOT
This is a ground reference to be used for the analog
inputs
A23
AI1
Analog input 1.
A24
NEVP1
Output of the current controlled electrovalve EVP1
driver; 2 A maximum continuous current (driving to –
Batt); built-in freewheeling diode to A13.
A25
NEVP2
Output of the current controlled electrovalve EVP2
driver; 2 A maximum continuous current (driving to –
Batt); built-in freewheeling diode to A13.
A26
NEVP5
Output of the current controlled electrovalve EVP5
driver; 2 A maximum continuous current (driving to –
Batt); built-in freewheeling diode to A15.
A27
NEVP6
Output of the current controlled electrovalve EVP6
driver; 2 A maximum continuous current (driving to –
Batt); built-in freewheeling diode to A15.
A28
KEY
Connected to the power supply through a microswitch
(CH) with a 10 A fuse in series.
A29
-BATT
Ground. Connect to ground reference.
A30
CANL 2
CAN 2 Low signal.
A31
CANH 2
CAN 2 High signal. A 120R termination resistance is
present between CAN L 2 and CAN H 2.
A32
-BATT
Ground. Connect to ground reference.
A33
PPOT1
Low power regulated output (+12V). Maximum current
550mA.
A34
PPOT2
Low power regulated output (+5V). Maximum current
100mA.
A35
AI2
Analog input 2.
