Zapi VCM 2uC, Руководство пользователя

Страница: 23 / 54

AFDZP0BA – VCM Zapi 2uC - User Manual Page - 23/54
7.2 CNB Ampseal 23 poles (only for VCM PREMIUM)
B1 AI3 Analog input 3.
B2 AI4 Analog input 4.
B3 AI5 Analog input 5.
B4 AI6 Analog input 6. Read by both microcontrollers.
B5 AI7 Analog input 7. Read by both microcontrollers.
B6 AI8 Analog input 8.
B7 POWER IN 2 Power input 2. The power supply for loads must be
connected here with a fuse in series.
B8 PEV2 Common positive supply for EVP9. Optionally, in the
36-48V version, it is possible to install a Smart driver
on this output.
B9 CHA 2 Phase A of incremental encoder 2. Read by both
microcontrollers.
B10 CHB 2 Phase B of incremental encoder 2. Read by both
microcontrollers.
B11 AI9 Analog input 9.
B12 AI10 Analog input 10.
B13 DI8 Input of the switch DI8. The input is active high.
B14 DI9 Input of the switch DI9. The input is active high.
B15 NEV3 Output of the PWM voltage controlled electrovalve EV3
driver; 2 A maximum continuous current (driving to –
Batt).
B16 PPOT3 Low power regulated output (+5V). Maximum current
75mA.
B17 CHA 1 Phase A of incremental encoder 1. Read by both
microcontrollers.
B18 CHB 1 Phase B of incremental encoder 1. Read by both
microcontrollers.
B19 NPOT This is a ground reference to be used for encoders
B20 -BATT Ground. Connect to ground reference.
B21 DI10 Input of the switch DI10. The input is active high. .
B22 DI11 Input of the switch DI11. The input is active high.
B23 NEVP9 Output of the current controlled electrovalve EVP9
driver; 4A maximum continuous current (driving to –
Batt); built-in freewheeling diode to B7.