Zapi VCM 2uC, Руководство пользователя

Страница: 32 / 54

Page - 32/54 AFDZP0BA – VCM Zapi 2uC - User Manual
13) I MIN EVP6
0 to 100. This parameter determines the minimum current applied on the
EVP6 when the position of the command is at the minimum.
14) I MAX EVP6
From 0 to 100. This parameter determines the maximum current applied to
the EVP6 when the position of the command is at the maximum.
15) I MIN EVP7
0 to 100. This parameter determines the minimum current applied on the
EVP7 when the position of the command is at the minimum.
16) I MAX EVP7
From 0 to 100. This parameter determines the maximum current applied to
the EVP7 when the position of the command is at the maximum.
17) I MIN EVP8
0 to 100. This parameter determines the minimum current applied on the
EVP8 when the position of the command is at the minimum.
18) I MAX EVP8
From 0 to 100. This parameter determines the maximum current applied to
the EVP8 when the position of the command is at the maximum.
19) I MIN BRAKING
From 0 to 100. This parameter determines the maximum current applied to
the EVP9 (load wheels brakes) when the position of the command is at the
maximum.
20) I MAX BRAKING
From 0 to 100. This parameter determines the maximum current applied to
the EVP9 (load wheels brakes) when the position of the command is at the
maximum.
21) EVP1 OPN DELAY 1
Seconds. It determines the acceleration ramp on EVP1.
The parameter sets the time needed to increase the current from MIN EVP1
to the MIDDLE EVP1.
22) EVP1 OPN DELAY 2
Seconds. It determines the acceleration ramp on EVP1.
The parameter sets the time needed to increase the current from MIDDLE
EVP1 to the MAX EVP1.
23) EVP1 CLS DELAY 1
Seconds. It determines the deceleration ramp on EVP1.
The parameter sets the time needed to decrease the current from the
MIDDLE EVP1 to MIN EVP1 OFF.
24) EVP1 CLS DELAY 2
Seconds. It determines the deceleration ramp on EVP1.
The parameter sets the time needed to decrease the current from the MAX
EVP1 to MIDDLE EVP1.