ZANTIA HEBE, Руководство по эксплуатации и обслуживанию

Страница: 4 / 36

INDEX
A. GENERAL INFORMATION
a.1
General safety rules
a.2 Technical features
a.3 Accessory equipment
a.4 Identity plate
a.5 Guarantee
a.6 Suitable fuel
a.7 Ordering spares
a.8 Waste material
B. INSTALLATION INSTRUCTIONS
b.1
Initial warnings
b.2 Moving and transporting
b.3 Positioning
b.4 Installing the flue gas outlet
b.5 Installing the combustion air inlet pipe
b.6 Connecting to the power supply
C. USER INSTRUCTIONS
c.1
Description of the console
c.2 The use of the buttons
c.3 Meaning of the LEDs
c.4 Display
c.5 Operating mode
c.6 Starting the stove
c.7 Feeding the pellets
c.8 Fire present
c.9 Stove in operation
c.10 Changing the set heating power
c.11 Changing the room temperature setting
c.12 Room temperature reaches the set temperature (temperature setpoint)
c.13 Stand-by
c.14 Turning off the stove
c.15 The menu
c.16 User menu
c.17 Menu M1 - SET CLOCK
c.18 Menu M2 - Set chrono
c.19 Menu M3 - Language selection
c.20 Menu M4 - Stand-by
c.21 Menu M5 - Buzzer
c.22 Menu M6 - Initial feeding
c.23 Menu M7 - Stove status
c.24 Menu M8 - Technical calibrations
c.25 Menu M9 – Exit
D. FUNCTIONS OF THE MECHANICAL AND ELECTRIC COMPONENTS
d.1
Auger motor
d.2 Smoke intake motor
d.3 Fans
d.4 Electronic card
d.5 General switch
d.6 Fumes probe
d.7 Room probe
d.8 Sparking plug
d.9 Manual reset thermostat
E. ORDINARY CLEANING AND MAINTENANCE
e.1
Cleaning and maintenance by the customer
e.2 Periodic maintenance by the Assistance Center
F. ALARMS
f.1
Blackout
f.2 Smoke temperature sensor alarm
f.3 Smoke overtemperature alarm
f.4 Smoke encoder alarm fault
f.5 Failed start-up alarm
f.6 No pellets alarm
f.7 Overtemperature thermal protection alarm
f.8 No negative pressure alarm
G. SOLUTIONS TO POSSIBLE PROBLEMS
4