ZANTIA HEBE, Руководство по эксплуатации и обслуживанию

Страница: 28 / 36

D. FUNCTIONS OF THE MECHANICAL AND ELECTRIC COMPONENTS
d.1 Auger motor
The auger motor drives the auger, which brings the pellets
from the tank to the grate.
d.2 Smoke intake motor
The smoke intake motor is fixed on the extraction turbine on
the back of the stove. Its function is to intake and to expel
the fumes that form in the combustion chamber. This
operation permits a perfect combustion and a better thermic
efficiency.
d.3 Fans
The tangential or centrifugal fan intakes the room air and
returns it hot, by pushing it through the exchanger tubes.
d.4 Electronic card
The electronic card guarantees the correct functioning and
the maximum safety of the stove, in the management of all of
its functions.
d.5 General switch
This electronic component of the stove is composed by a 4A
fuse and by an electronic filter that protect the stove from
electrical overload and electromagnetic inconveniencies.
d.6 Fumes probe
The fumes probe surveys the fumes’ temperature in the
intake turbine, and it operates when the temperature reaches
270°C, driving the stove to the conservation mode “RIS”.
d.7 Room probe
The room probe is positioned on the back of the stove and it
surveys the temperature of the room where the stove is
located.
d.8 Sparking plug
The sparking plug permits the primer of the flame inside the
grade. The lighting of the pellets occurs because of the
overheating of the plug and the heating of the air inside the
combustion chamber.
d.9 Manual reset thermostat
The manual reset thermostat operates by unsetting the
functioning of the auger when the preset temperature is
reached in the tank.
28