ZANTIA HEBE, Руководство по эксплуатации и обслуживанию

Страница: 11 / 36

b.4 Installing the flue gas outlet
The installation can be performed either without a masonry flue, or with an existing flue.
FIG 1. INSTALLATION WITHOUT A MASONRY FLUE
Flue gas outlet Ø 80 – Using an easy to inspect T-joint, reach the outside of the building horizontally; proceed vertically until you
reach the roof with a cohibented flue, equipped with an anti-wind chimneystack. All the joints must be sealed.
FIG. 2. INSTALLATION WITH AN EXISTING FLUE
Flue gas outlet Ø 80 – Reach the existing flue horizontally, making sure that it presents a minimum section of 200cm² and an
easy to inspect base, for its annual cleaning. All the joints must be sealed.
IMPORTANT!! We recommend you to have the installing technician verify the efficiency and the state of the flue, the observance
of national and local laws regarding flue gas outlets’ joints, and to use appropriate materials.
The information reported above is purely indicative for a correct installation; ZANTIA is not responsible for what concerns the
installation.
11