44
CONFIDENTIAL
DOC-USR-0146-02
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
Analog
None
Pid
(UDP/TS Only)
0 – 8191
(
120,121,122,123
)
If UDP format is selected, the PID to use for that
audio channel.
Max PTS-PCR
(UDP/TS Only)
0 – 500 (
250
)
Allows user to specify a smaller interval than 250ms
between PTS and PCR. This is for systems that
require tighter PTS-PCR intervals. It is generally
recommended to leave this value at 250. Certain
decoders may require a value of Max PTS-PCR
similar to the video delay. If an issue is encountered
with a specific decoder, please try setting this value
to the same value as video delay.
Format
(UDP/TS Only)
ADTS
LATM
Allows user to select between ADTS headers for
AAC and LATM headers.
Jumbo PES
(UDP/TS Only)
None
1 AU, 2 AUs, 3 AUs, 4 AUs
This needs to be set for compliance with certain
ISDB-T decoders. Should otherwise be left as
“None”.
RTP Port
(RTP Only)
0 – 9999
(8892 – 8898)
If RTP format is selected, the port # associated
with that audio channel.
Output Format
RTP/RTSP
UDP
TSRTP
RTMP
TSFILE
FILE
MPTS
Output format of encoded stream.
RTP requires an SDP file for the receiver or the use
of the RTSP URL (see Section 5.9 for more details).
If UDP is selected, don’t forget to check the value
of TS Rate to make sure it is in line with
expectation.
TSRTP streams TS over RTP.
See Section 8.0 for more on using the RTMP
format.
TSFILE will write audio and video to a TS file. If
selected, the path/name of the file in “Dest
Address” must also be specified (for example:
/media/sda1/example.ts to write to “example.ts”
on a drive connected to USB1).
FILE will write raw .h264 and raw .aac to 2
separate files. If this is selected, you should type
the path/name of the H.264 file in “Dest Address.”
If audio is enabled, a companion .aac file is then
created (for example, for “example.h264” a
companion file “example_0.aac” is created).
MPTS will be supported in an upcoming release.
Dest Address
192.168.x.y
(192.168.0.6)
The IP address that the encoder is streaming to.
Dest Port
0 – 9999 (
5004
)
The port that the encoder is streaming to.
