36
CONFIDENTIAL
DOC-USR-0146-02
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
click “ok”.
(4)
Return to the System Setup tab.
(5)
Select your newly created configuration from the preset dropdown menu at the bottom of the
screen.
(6)
As soon as you select “z3_config1”, the screen will reload.
(7)
Change your desired settings.
(8)
Once your changes have been set in this configuration, click on the “Save” button.
(9)
A pop-up window appears to confirm the saving of these settings is complete. Click “OK”.
*Note:
The very first time settings are saved may take up to 30 seconds. This is due to some flash
initialization which occurs on the very first configuration save.
(10)
In order for these changes to take effect, the unit must be re-started. Power the unit off
then back on and wait 45-60 seconds for the unit to boot up.
9.2
Using the Password Feature
The SBE264-DVR-23 includes an optional password to prevent unauthorized users from accessing the
HTTP-based user interface. The steps for using it are shown below:
(1)
In the System Setup tab, click on “go” next to “Set Password”:
Figure 38 Entering a User Preset Name
(1) Type “z3_config1”
(2) Click “ok”
Click “Save”
Figure 39 Saving New Settings to a User Preset
