Z3 Technology Z3-SBE264-DVR-23 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 51

background image

40

CONFIDENTIAL

DOC-USR-0146-02

____________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

Layout
(Decode Only)

(See Note 2)
1x1

Determines layout to use for displaying multiple
pictures. In most cases 1x1 is used. 2x2 can be
used when 4 decodes are occurring. Other
configurations are possible (see Note 2).

Set Display
(Decode Only)

If a display mode, resolution, or layout different
from the default is desired, the user would change
to the desired value and then click the “Set
Display” button. The user should also click this
before doing the very first decode.

Set Device Name

Sets the name for the SBE264-DVR-23.

Set Password

Sets the system password. See Section 9.2, “Using
the Password Feature” on page 36 for more
details.

update device firmware

See Section 7.0

download device logs

Clicking this causes the SBE264-DVR-23 to extract a
set of diagnostic logs that can be sent to Z3
Technology in the event of an issue to be reported.
This file is saved on the PC which the GUI is being
run from.

Note 1:  Resolutions supported:
                   1080p60, 1080i30, 1080i29.97, 1080i25, 1080p60, 1080p59.94, 1080p50,
                   720p60, 720p59.94, 720p50, 480p60, 576p50

Note 2: Layouts supported:
1x1, 2x2, 4x4, 2x2+4, 1+5, 1+7, 3x3, 1+2PIP, 1+4PIP

11.2

The User Presets Tab

Parameter

Options (default in bold)

Notes

new

Define a new configuration file. Up to nine
configurations can be created.

rename

Rename a configuration file.

delete

Delete a configuration file.

export

Export current settings to a file. Not supported
in this release.

import

Load settings from a previously exported file.
Not supported in this release.

11.3

The Status Tab

Note:

This tab may take a few seconds to load.

Output Value

Explanation

Video Status

CH

The channel number (1, 2 or 3)

«
...
38
39
40
41
42
...
»

Содержание Z3-SBE264-DVR-23




















































Отзывы:

Нет отзывов

Похожие инструкции для Z3-SBE264-DVR-23

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 38

Бренд: µ-Dimension Страницы: 17

Бренд: µ-Dimension Страницы: 16

Бренд: µ-Dimension Страницы: 6

Бренд: µ-Dimension Страницы: 8

Бренд: V2 Страницы: 48

Бренд: Net Optics Страницы: 15

Бренд: Humandata Страницы: 10

Бренд: Patton electronics Страницы: 11

Parallel Port Input/Output Converter PPIO

Бренд: B&B Electronics Страницы: 34

Бренд: ICP DAS USA Страницы: 8

Бренд: Vanner Страницы: 28

Бренд: Olimpia splendid Страницы: 144

Blackbird 9140A-PCA

Бренд: Monoprice Страницы: 11

Бренд: Kramer Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды