YWH100 IP Phone User manual V1.38
Page 18 of 32
router automatically assigns all the required network parameters to any device
connected to it when the device log on. YWH100 IP phone is shipped from the
factory with DHCP on. So, if your LAN or router is configured to use DHCP
addressing, the IP phone’s LAN parameters will automatically be configured as
soon as it is connected to the LAN or router and powered up.
pppoe: Those ADSL and Cable Modem users please select this item for it is a
protocol especially designed for them. With this system, ADSL ISP automatically
assigns all the required IP parameters to any device connected to it when the
device log on.
modem: If the IP phone used with modem, please select this item to get relevant
network parameters auto. Then please fill ID and pin into ppp id and ppppin fields.
●
ppp id:
With pppoe or modem selected in iptype drop down list, please enter the user
name here.
●
ppp pin:
With pppoe or modem selected in iptype drop down list, please enter the
password here.
●
local ip:
With static ip selected in iptype drop down list, please enter IP address of IP
phone here.
●
subnet mask:
With static ip selected in iptype drop down list, please enter subnet
mask of IP phone here.
●
router ip:
With static ip selected in iptype drop down list, please enter router IP
address of IP phone here.
●
dns:
With static ip selected in iptype drop down list, please enter IP address of DNS
server here.
●
dns 2:
With static ip selected in iptype drop down list, please enter IP address of
backup DNS server here.
●
mac:
MAC address is the physical address supplied by the Ethernet NIC. YWH100
phone is shipped from the factory with a unique algorism MAC address printed on the
back of the base.
