YWH100 IP Phone User manual V1.38
Page 24 of 32
allocated by system.
●
account
: With H323 protocol used, while calling card is set, please type the
account of chosen card into this field; while md5 account item selected in local type
dropdown list, enter ID here; while account is selected in local type dropdown list,
enter H323 ID here. While prefix item selected in use dialplan dropdown list, enter
language indicating number, card number and # here, such as 14589653185
＃
. With
SIP system which requires authentication, please put the username/account into this
field. With MGCP protocol used, please enter local endpoint id (eg., aaln/0) here.
With Net2phone system used, enter account of Net2phone card here.
●
pin:
With H323 protocol used, while calling card is set, please type the password
of chosen card into this field; while md5 account item selected in local type
dropdown list, enter password here. While prefix item selected in use dialplan
dropdown list, enter password and # here, such as 3185
＃
. With SIP system which
requires authentication, please put the password into this field. With MGCP
protocol used, please enter domain name here. With Net2phone system used, enter
password of Net2phone card here.
Note
When MGCP protocol is used, some system requires adding “[]” outside the
domain name. So please fill the domain name with “[]” into pin fields, such as
［
voiptest.com
］
.
●
rtp tos
: Fill TOS segment of IP head package in RTP digital follow here.
●
register port:
The local UDP port registered with server to accept incoming
handshaking messages. The default port number for MGCP protocol is 2427. The default
port number for SIP protocol is 5060. For H.323 or Net2phone, any number between
1024 and 65535 is acceptable.
