YWH100 IP Phone User manual V1.38
Page 34 of 32
continue the call. When the call is over, put back the handset.
Note
When you communicate with the other party without lifting the handset,
please do not exceed 40 CM from speaker.
2, Place a call
(1)
Call another YWH100 IP phone under the same Gatekeeper
①
Handset:
Pick up the handset and listen for the Internet dial tone. Then dial the phone
number you wish to call and press
【
#
】
or
【
Call
】
to end the dialing. Once the call
connection has been established and the ring tone has sounded, wait for the other party to
answer. When the other party answers, you can begin speaking. When the call is over, put
back the handset. The dialed number has been saved into the buffer.
②
Hand free
: Press
【
Hand free
】
and listen for the Internet dial tone. Then input the
phone number you wish to call and press
【
#
】
or
【
Call
】
to end the dialing. Once the call
connection has been established and the ring tone has sounded, wait for the other party to
answer. When the other party answers, you can begin speaking. When the call is over,
Press
【
Hand free
】
again. The dialed number has been saved into the buffer.
③
Blind dialing
: Use the keypad to enter the phone number you wish to call and then
press
【
#
】
or
【
Call
】
to make the call. Once the call connection has been established and
the ring tone has sounded, wait for the other party to answer. When the other party
answers, you can begin speaking. When the call is over, Press
【
Hand free
】
again. The
dialed number has been saved into the buffer.
(2) Place a call without login the Gatekeeper
If YWH100A/B/C/D IP phone does not login the Gatekeeper, you can place a call by
lifting the handset or pressing
【
Hand free
】
and then inputting the IP address of the other
party, and then pressing
【
#
】
or
【
Call
】
.
(3)Place a call through Gateway
If YWH100A/B/C/D IP phone does not login the Gatekeeper, you can place a call
through Gateway directly by lifting the handset or pressing
【
Hand free
】
and then
