YWH100 IP Phone User manual V1.38
Page 28 of 32
●
innerline:
Enable/disable multi-settings by selecting corresponding items from
dropdown list. YWH100 IP phone allows saving 5 settings totally.
disable: Disable multi-settings by selecting this item, then the phone will call
out using current setting.
enable: Use designated system to place calls by selecting this item.
switch: Enable multi-settings by selecting this item. Then please fill the prefix
switching to backup setting 1 and backup setting2 into
l
ocal prefix and
nonlocal prefix fields.
Note
To modify the parameters of backup settings, please use Telnet commands.
●
local prefix:
With
enable
or
switch
selected in
innerline
dropdown list, please fill the
number switching to backup setting 1 here, such as 56.
●
nonlocal prefix:
With
enable
or
switch
selected in
innerline
dropdown list, please fill
the number switching to backup setting 2 here, such as 57.
●
use digitmap:
Enable/disable digitmap by checking/unchecking the box.
●
ring type:
Set ring type by selecting corresponding item from drop down list.
dtmf 0-9: Set ring as ordinary rings in different frequency
not disturb: Set the phone do not ring by selecting this item.
pcmring: Set ring as music shipped from factory by selecting this item.
user define
：
Set ring as music saved by user by selecting this item.
●
answer:
Enter a number from 0 through 60 to set the entries of the seconds before the
phone answer the call auto or forward the calls. To disable auto answer function, please
set this parameter as 0.
●
predial time:
Set time limit from picking up the speaker to dialing the first the
number.
●
interdial time:
Set time limit between dialing two numbers.
●
postdial time:
Set time limit from dialing the last number to placing a call. If the next
number is not dialed within the post dial time limit, then the phone will call the dialed
number auto.
