YWH100 IP Phone User manual V1.38
Page 20 of 32
Agent IP address or domain name.
With SIP protocol used, the protocol service refers to SIP Proxy Server. Check
this box according to system, and then fill service addr field with SIP Proxy
Server IP address or domain name.
With Net2phone protocol used, the protocol service refers to designated server.
Please check this box, and then fill the designated IP address or domain name
into service addr field.
Note
Designated Net2phone server IP address are: 216.53.3.52; 4.43.114.39;
4.43.114.38 or 205.228.245.8. Domain names are: call1.net2phone.com;
call2.net2phone.com;skip1.net2phone.com;skip2.net2phone.com;skip1.f8g9
h0.net or skip2.f8g9h0.net.
●
Service type
: This option is used to accommodate the miscellaneous requirements of
the system providers. When IP phone is connected to these systems, please select the
corresponding service type. Please also visit http://www. yntx.com for reference
configuration of some of these systems.
Common: no special requirements
Mediaring
:
use Mediaring prepaid
etalk: Use eTalk prepaid card by selecting this item. With eTalk selected here,
please select dialnum in dial plan drop down list and then fill 00 into dial number
field.
Note
When eTalk card is used, besides above configuration, please set other
parameters as follows: service addr:
202.83.204.213
; service id: ETNSGK;
account: 0117ETNS.If IP phone can not log in
202.83.204.213
,please try to
use
202.83.204.213
. And if IP address of the phone is a private one, please do
port mapping on NAT device. Please refer to build in proxy document to get
detailed operation.
auvtech: Use Auvtech’s h323 system by selecting this item.
