YWH100 IP Phone User manual V1.38
Page 9 of 32
Installation
1, Contect Handset and Phone
Insert Hanset cord into handset cord jack of the base. Please see Figure 3.
Figure 3 Handset and base of Phone connection
2, Connect Phone and Power
Palce the phone nearby of Power socket.Plug the power cord adapter into the Power
Jack. Then plug the other end of the power cord adapter into the appropriate power
socket.Refer to Figure 4.
Figure 4 Connect Pwoer
3, Connect the phone into the net
LAN users: Plug one end of the direct-connecting cable into RJ-45 jack which is
located in the back of phone, and connect the other end of calbe to hub. Please see
figure5.
