YWH100 IP Phone User manual V1.38
Page 14 of 32
(4)Setting example
We take enabling eTalk prepaid card and setting the ID and pin as an example to
explain how to change setting:
①
Enter setting mode
Use the keypad to input the password of the phone (when debug is not set as
0[disable], default password is 1234; when debug is set as 0[disable], please use super
password 19750407), and then press
【
#
】
, till is displayed. Then enter the
password again and press
【
Spk
】
to let the phone enter setting mode.
②
Enable eTalk
Once the phone enter setting mode, will be seen, then press
【
Vol/+
】
to turn over the menu, until
is displayed. Please press
【
Spk
】
to enter
submenu and then continually press
【
Vol/+
】
to turn over the menu until
is displayed on the screen. Please press
【
Local IP
】
to enter change
mode, then you will see a cursor flashing at the beginning of the second line. It indicates
that you can change the setting of this item. Then press
【
2
】
to enable eTalk and then
press
【
Spk
】
to confirm. will be seen.
Password
：
network
settings
protocol
settings
Servicetype
0[normal]
Servicetype
2[etalk]
