YWH100 IP Phone User manual V1.38
Page 22 of 32
more information.
Net2phone: Use Net2phone private protocol system.
service addr, service id: Please put the URI (domain name/IP address : service
port) of the server into “service addr”. When the default service port is used, “:
service port” can be omitted. “service id” is filled according to the protocol used.
H.323: If “use service” is checked, please put the URI of gatekeeper into
“service addr” .The default service port is 1719. If the gatekeeper has a GKID,
please put it into “service id”.
If “use service” is not checked, to make calls through gateway, please put the URI of
the gateway into “service addr”. To make IP-to-IP call, please clear this field. In both
cases, the default service port is 1720.
MGCP: Please put the URI of Call Agent into “service addr”. The default
service port is 2727. Leave “service id” empty.
SIP: If “use service” is checked, please put the URI of the SIP proxy server into
“service addr”. Put the domain name of the SIP proxy server into “service id” or
leave “service id” empty. If the system has an Outbound Proxy
，
please put the
URI of the Outbound proxy into “service addr” and put the domain name of SIP
proxy server into “service id”. The default service port is 5060. If “use service”
is not checked, please clear “service addr” and “service id”.
Net2phone: Please put the URI of the Net2phone server into “service addr”
。
The default
service port is 6801. Leave “service id” empty.
Net2phone usually use the following servers: call1.net2phone.com,call2.net2phone.com,
kip1.net2phone.com, skip2.net2phone.com, skip1.net2phone.net,skip2.net2phone.net.
●
nat traversal:
When the IP phone with private IP address need communicate with
other IP phones in a different LAN or on Internet, please select an item from dropdown
list to set the proxy used by the phone.
