EM-0146-8
- -
9
2.5 Specifications
Table 2.5a Specifications
Model
ASE3-*AA-G80*-
ASE5-*BZ-G130*-
ASE10-4CE-G200*-
Max. Flow L/min
80.8
132.7
205.4
Min. Controlled Flow
2 %
Hysteresis
1 % or less
Repeatability
1 % or less
Flow Control
Input Signal Voltage
*1
0 to 6.25 V
0 to 5.75V
0 to 5.00V
Pres. Adj. Range MPa
0.1 to 17.5
Hysteresis
1 % or less *2
Repeatability
1 % or less *2
Pres. Control
Input Signal Voltage *1
0 to 5.0 V
Atmosphere
Indoors (no direct sunlight)
No corrosive gas, flammable gas, oil mist, or dust.
Altitude
1000 m or less above sea level
Ambient Temp.
0 to 40 °C (no freezing)
Storage *3
Ambient Humidity
80 %RH or less (no condensation)
*1 Default value (allowable maximum input signal voltage: up to 10 V).
*2 Pressure control accuracy depends on system tuning; this value is for reference.
*3 The storage temperature is different from the ambient temperature during operation.
Table 2.5b ASE (Pump) Specifications
Table 2.5c AC Servo Motor Specifications
Model
ASE*-**-***-
Operating Pres.
0.1 to 17.5 MPa
Rotational Direction
Clockwise when viewed from the servo motor
Hydraulic Fluid
Petroleum based fluid equivalent to ISO VG32 or 46
Viscosity
20 to 400 mm
2
/s
Fluid Temp.
0 to 60 °C
Model
ASE*-**-***-
Insulation Class
Class F
Cooling System
Totally-enclosed forced-cooling
Protection
IP44 (except for the shaft through portion)
Ambient Temp.
0 to 40 °C (no freezing)
Ambient Humidity
80 %RH or less (no condensation)
Environment
al
Condition
Vibration
24.5 m/s
2
or less
(When the motor stops, reduce the allowable value to less than one-half.)
Fan Power
Voltage/Frequency
Single-phase, AC 180 to 220 V, 50/60 Hz
