Yuchai U35, Руководство оператора

Страница: 145 / 157

5-42
Washing of floor mats
If the floor rubber mats are dirty, clean them at any time to prevent accidents due to slipping
and falling of the floor.
Warning: If you accidentally touch the joystick, the working device or machine will
suddenly move, causing serious accidents.
Therefore, be sure to stop the machine on a solid and flat ground before removing
the rubber floor mat. The operator must lift the pilot safety handle and its upper
control box to lock the pilot system before standing up from the seat.
Washing steps of floor mats
1) Take out the floor rubber mat in the
cab.
2) Remove dirt with a brush to or directly
rinse the floor mat with water.
3) Mop the floor in the cab clean.
4) After the floor rubber mat is blown dry,
recover the mats in the cab.