Yuchai U35, Руководство оператора

Страница: 36 / 157

2-22
20) Do not excavate the working surface
below the suspended part, as there is a risk
of falling rocks or the suspended part
collapsing and hitting the machine.
5. Prevention of tipping, slipping and handling during operation
Warning: 1) When you have to turn on a ramp, you can only turn in a large
arc. When the machine is about to turn right, extend the boom bucket arm to
the left, with the bucket about 30 cm above the ground, and then lock the
platform. And vice versa.
2) When skidding, immediately press the dozer blade and bucket to the
ground.
3) When the machine is overturned, the driver must not jump off the car, but
should firmly grasp the handrail in the cab or the column of the cab.
Jumping from a cab can easily cause injury or death accidents.
The machine is extremely prone to
overturning in the following situations that
must be avoided:
1) When the machine moves on uneven
ground, the two tracks are high on one side
and low on the other, or more than half of
one track is suspended.
2) When one track is on loose soil while the
other track is on solid soil.
3) When there are karst caves or mud pits
underground on one side of the machine.
4) When traveling on slopes with a
longitudinal slope greater than 25° while
unloading in the downhill direction.
5) When traveling on slopes with a
transverse slope greater than 15° while
unloading in the downhill direction.
6) On a slope, the two tracks are in a 90°
direction with the slope, and the platform
rotates for more than 90°.
7) When working on slopes, the machine
makes sharp turns, the platform quickly
turns, or suddenly stops.
8) When the machine swings 180°
downwards on a slope.
9) When the backing operation (ditching,
etc.) shifts the uneven road surface.