3 8
y t
a //
Wrap both wheels using the cardboard wheel covers
and attach them to each other using a long cable tie.
b //
Attach the transport protection to the frame and se-
cure the chain to the chain stay using a cable tie in order
to avoid damages.
c //
Remove the rear derailleur from the derailleur hanger
to avoid frame damages. Wrap the rear derailleur in
bubble wrap and secure everything with a cable tie.
d //
Attach the cardboard covers to the frame and
IN
the box
put the bike on the front and rear axle stand.
Remove the handlebar from the stem and put it upright
next to the fork. Make sure not t
O
damage any cables or
hoses.
e //
Place both wheels next to the frame in the box. There
are cutouts in the bottom segments of the box to secure
a safe wheel placement.
Also see picture on the right.
f //
Fix some foam material to the arch of the fork. Use
a cable tie to attach the handlebar to the fork as well, in
order to prevent damages.
THIS IS HOW YOU PACK YOUR BIKE FOR SHIPMENT OR SERVICE
f
c
d
e
a
b
Содержание RTFM JEFFSY
